Yanhua Mini ACDP + Module 27 Read BMW MSV90 DME ISN

Yanhua Mini ACDP + Module 27 supports reading, writing, and cloning BMW E/F chassis ISN without having to open the DME shell. Apply to MSV80, MSD80, MSD81, MSD85, MSD87 MSV90 Continental/ SIEMENS DME types.

This is reading BMW MSV90 DME ISN on the bench as an example, follow the post carefully to learn how to do it. To check the connection diagram, please click "Help".

Check the full video to learn:

Accessories

BMW MSV90 DME Module

MSV90 interface board

20PIN cable

ACDP host

OBD+ICP adapter

Install the MSV90 interface board.

Short the CAN resistor on the OBP+ICP adapter to the CAN-R-Join side.

Connect the MSV90 DME & ACDP host.

Operation

Mini ACDP >> BMW >> DME ISN >> BENCH Mode read/write DME ISN >> SIEMENS/Continental DME >> Fxx >> N52(MSV90) >> Read ISN >> Continue

Confirm the system info and save the screenshot.

Please take a screenshot and export the ISN data.

Export >> Save >> OK

ISN data is exported successfully.

Reading ISN data finished.

www.obd2shop.co.uk

Yanhua Mini ACDP Program JLR(2015-) KVM Add Key/All Keys Lost

This is a tutorial on using Yanhua Mini ACDP + Module 9 to program Land Rover 2010-2019 KVM add key & all keys lost. Users can click "Help" in app to check the connection info.

Normally, Land Rover's KVM module is at the left side or right side of the vehicle trunk. Jaguar's KVM is at the right side of the rear seat or in the front of the passenger seat.

Preparation

Blank key

BAV-KEY adapter

KVM interface board

ACDP host

Copper pillar

OBP+ICP adapter

20PIN cable

KVM module

1.Install the copper pillar, align D1-D4 test points. As long as the 4 test points are aligned, then all test points are aligned.

2.Lock the board with PCB lock & copper pillar. Connect the OBP+ICP adapter & KVM interface board. 

3.Connect the adapter & ACDP host, power up ACDP.

Operation

Mini ACDP >> Jaguar/ Land Rover >> ICP Add key/All key lost(2015-) >> KVM ICP(MC9S12XEQ384) >> Add key auto mode

Note:

1.Please prepare the OBP+ICP adapter, KVM interface board, KVM module, BAV adapter and blank key.

2.Save the original EEPROM, DFLASH data& the ones after programming the keys according to the software prompt.

3.ACDP device is forbidden to be powered off during the process of adding a key, otherwise it will cause the key to fail to be added.

Precautions:

1.Ensure the well connected for ACDP device, OBP+ICP adapter, KVM interface board & KVM module.

2.Follow the software prompts to save the chip data read from KVM module.

Pin detection passed. If the detection fails, please check and clean the test points.

Press "Continue".

It is detected that the KVM module chip has been encrypted. Press "Continue".

Please save the original PFLASH data of the KVM module.

Please save the original EEPROM data of the KVM module. 

Please save the original DFLASH data of the KVM module.

Check the VIN number and other vehicle info, press "Continue".

Note:

1.To maintain the ACDP device power-on state, first disconnect the OBP+ICP adapter from the ACDP device(keep the OBP+ICP adapter, KVM interface board and KVM module connected).

2.Then connect the ACDP device to the BAV-KEY adapter and place the programming key correctly on the BAV-KEY adapter.

Current key ID: 822D4E37

Choose the unoccupied key ID displayed as 000: Key3

Please save the EEPROM data of the KVM module after adding the key.

Please save the DFLASH data of the KVM module after adding the key.

Note:

1.Keep the ACDP device powered on. First disconnect the BAV-KEY adapter from the ACDP device.

2.Then connect the ACDP device, OBP+ICP adapter, KVM interface board and KVM module to ensure normal communication.

Continue >> Continue

Check the IMMO info. As you can see, the new key ID is in the key list.

Writing chip...

Adding the key completed.

Please install KVM module to the car and confirm that the new key can be used normally!

OK >> OK

This is how to use Mini ACDP JLR KVM Module for key programming.

www.obd2shop.co.uk