How to Export Yanhua Mini ACDP 2 Folder in Android System?

This is a guide to exporting the Yanhua Mini ACDP 2 folder in the Android system step by step. Read the tutorial carefully to learn how to do it.

Read also

Yanhua Mini ACDP Data Export Operation Guide(iOS system)

Step 1. Locate The Folder to Export

Files >> Internal storage >> yanhua_acdp folder >> aliyun folder >> ATmatch folder

Find the file that you want to export.

Here's taking to export BMW data as an example.

Step 2. Zip Folder

Long press BMW folder >> Selected and click More >> Compress >> Current location, OK

Step 3. Share File

Long press the zip file to export >> Selected and click Share

Now you're allowed to share the Mini ACDP 2 file via social app.

www.obd2shop.co.uk

Modify ACDP-1 Module 18/19/25/30 adapters to fit ACDP-2

This post shows how to modify the DB15-LAN and PTCU adapters in ACDP-1 Module 19 to fit ACDP-2.

Prepare a cross screwdriver and diagonal pliers.

Use a phillips screwdriver to remove the screw on DB15-LAN and PTCU.

Disassemble the casing.

Use diagonal pliers to cut the protruding parts of the front ends of the two shells flat.

Install the processed housing back.

Tighten the screws.

DB15-LAN and PTCU shell processing completed.

Move the switch to the CUT end.

(Solved) ACDP-2 connection to PC with USB cable failed

The previous article introduced that there are three ways to connect ACDP-2: Android, iOS, and PC.

For specific connection methods, please refer to the article:

Connect Yanhua Mini ACDP-2 to Android/iOS/PC via USB Cable

This article will tell you how to fix the problem when ACDP-2 fails to connect to the computer via a USB cable.

The situation where ACDP-2 connected to a computer via USB cable failed:

When the ACDP host is connected to the computer and then you open the ACDP 2 software on the PC, it shows that the device is not connected.

Click the "Setting" icon in the upper left corner of the software, then "PC Bound to ACDP-II device", and we can see the device list without any device information.

How to solve it:

This situation can be achieved by changing the device IP and connecting to the device.

Step 1. Move your mouse over the network icon in the lower right corner of your computer, then right-click and select "Open Network & Internet Settings".

Step 2. Click "Change adapter options".

If you don't know which network ACDP is active on, you can unplug the USB interface connected to the device to confirm.

Step 3. Move the mouse over the device network.

Right-click and click "Properties."

Choose "Internet TCP/IPv4" >> "Use the following IP address:"

Enter your IP address and DNS, as shown below, and click "OK" to continue.

Wait a few seconds before the device automatically connects.

Done!

For detailed operations, please refer to:

Yanhua Mini ACDP 2 BMW F Chassis BDC Key Add Tutorial

This is a tutorial on how to use Yanhua Mini ACDP 2 + Module 31 to add the BMW F Chassis BDC key by OBD. Including the DoIP & CAN method, all steps are basically the same except for the different options in the second step. Read this article carefully to learn.

DoIP Method

Check the video to learn:

https://youtu.be/uRKveW0c1sA

Follow the figure to connect Mini ACDP-1 or Mini ACDP-2.

Step1. Read Coding Data

Mini ACDP >> Make sure the device is connected >> BMW >> FEM/BDC >> IMMO/ Mileage >> BDC OBD(F Chassis) >> Module initial programming process >> Read coding data

Please use the ACDP standard power adapter(voltage+ 12V, current > =2.5A)

Click "OK".

Connect ACDP with vehicle OBDII port!

Viewing vehicle info, click "Continue".

Please save coding data.

Pay attention to the path to save file, the file name includes the data and time.

Read coding data finish.

Step2. Program/Upgrade System

Program/Upgrade system >> Method 1: DoIP update >> OK

Connect ACDP, DoIP adapter and vehicle OBDII port!

Please save the vehicle system data.

Backup file succeeded.

System status: ECU system is normal, need pre-processed.

Click "Continue".

About to start getting data from the server, please keep the network open during the process of getting data!

Prepare to program, please make sure the stable power supply and DO NOT pull out the device during the programming!

Pre-processing ECU, please wait...

Program BDC system finish.

Step3. Write Coding Data

Write coding data >> OK

Connect ACDP with vehicle OBDII port!

The system status is normal, click "Continue".

Please select the previously backed-up coding data file.

Writing coding data...

Write coding data finish.

Add key >> OK

Connect ACDP with vehicle OBDII port!

Check the system status to make sure that it does not require preprocessing.

Click "Continue".

Please put the working key close to the emergency start sensing antenna position.

Screenshot or click "Export" to save IMMO info.

The backup file succeeded.

Select a blank key position: Key_04, and click "Continue".

Please put the new key close to the emergency start sensing antenna position.

Learning new key, please wait...

Generate a new key finish.

CAN Method

Check the video to learn:

https://youtu.be/jSR-3epl8Cs

Follow the figure to connect Mini ACDP-1 or Mini ACDP 2.

Step1. Read Coding Data

Mini ACDP >> Make sure the device is connected >> BMW >> FEM/BDC >> IMMO/ Mileage >> BDC OBD(F Chassis) >> Module initial programming process >> Read coding data

Please use the ACDP standard power adapter(voltage+ 12V, current > =2.5A)

Click "OK".

Connect ACDP with vehicle OBDII port!

Viewing vehicle info, click "Continue".

Please save coding data.

Pay attention to the path to save the file, the file name includes the date and time.

Read coding data finish.

Step2. Program/Upgrade System

Program/Upgrade System >> Method2: DCAN update >> OK

Connect ACDP with vehicle OBDII port!

Please save the vehicle system data.

The backup file succeeded.

System status: The ECU system is normal, and needs to be pre-processed.

Click "Continue".

About to start getting data from the server, please keep the network open during the process of getting data!

Prepare to program, please make sure the stable power supply and DO NOT pull out the device during the programming!

Pre-processing ECU, please wait...

Program BDC system finish.

Step3. Write Coding Data

Write coding data >> OK

Connect ACDP with vehicle OBDII port!

The system status is normal, click "Continue".

Please select the previously backed-up coding data file.

Writing coding data...

Write coding data finish.

Add key >> OK

Connect ACDP with vehicle OBDII port!

Check the system status to make sure that it does not require preprocessing.

Click "Continue".

Please put the working key close to the emergency start sensing antenna position.

Screenshot or click "Export" to save IMMO info.

The backup file succeeded.

Select a blank key position: Key_04, and click "Continue".

Please put the new key close to the emergency start sensing antenna position.

Learning new key, please wait...

Generate a new key finish.

www.obd2shop.co.uk