Yanhua Mini ACDP Programming Master features and functions

Yanhua Mini ACDP Master Full Configuration including ACDP Programmer and 10 kinds of Modules. And this post will show you the main features and functions of them.

ACDP Programming Master Features:

1. Overturn the traditional work mode:
A single operation is changed to team cooperation.

2. Change of operation mode:
PC operation is changed to mobile phone operation.

3. Change of test connection mode:
Electric soldering iron is changed to No-solder dedicated connector.

4. Change from artificial observation to intelligent monitoring:
Artificial observation/trying is changed to an automatic detection algorithm, a graphical indication of the reliability of the connection. Ensure the data is not damaged and lost.

5. Change of service mode:
Offline service is changed to an online synchronous service.

ACDP and 9 kinds of Modules Functions:

Basic Module - ACDP Programmer

Support 93 /24/ 25 / 35/ 95 Series EEPROM in-circuit programming (ICP) and on adapter board programming (OBP), and parts of Freescale / NEC MCU in circuit programming（ICP）. This module is a necessary basic configuration for other modules.

Module 1 - CAS Module

(1) Support CAS1 – CAS3+ IMMO key programming by OBD or ICP mode, Mileage reset, Read/Write EEPROM and FLASH data.
(2) Support CAS4/CAS4+ IMMO key programming in-circuit programming (ICP), Mileage reset, Read/Write EEPROM and FLASH data.

Module 2 - FEM/BDC Module

Support FEM/BDC IMMO key programming by ICP or OBP mode, Mileage reset, Recover/Backup data.

Module 3 - ISN Module

Read/write N20/N55/N13 ISN code via OBD.
Read/write MSV80/MSD85 ISN code without opening DME shell.
Read/write other DME ISN code by opening DME shell.

Module 4 - 35160 Module

Support erase/adjust mileage of 080DOWQ/T,160DOWQ/T EEPROM.

Module 5 - Fujitsu CPU MB91F Module

Support Fujitsu CPU MB91F (Honda Fit, KIA K3/K5, Sonata 9, etc.) Mileage adjustment.

Module 6 - MQB/MMC Instrument

Support parts of VDO mileage adjustment of VW MQB platform via OBD, and Passat MMC (NEC D70F3525 + 95320) instrument adjustment after years 2015 by ICP mode.

Module 7 - Refresh BMW key

Refresh BMW E chassis/F chassis key to make BMW keys can be used repeatedly.

Module 8 - FRM module (FRM Footwell module)

Read and write BMW FRM module (FRM Footwell module) 0L15Y chip EEPROM/FLASH data. Read and write 3M25J chip EEPROM/D-FLASH/P-FLASH data.

Module 9 - Jaguar/Land Rover KVM Module

Support Adding key and all-key-lost for new Jaguar and land rover after the year 2015.

Module 10 - Porsche BCM Module

Support Adding key and all-key-lost for Porsche BCM.

https://yanhua-mini-acdp.blogspot.com/