Yanhua Mini ACDP + Module 13 Clone VW Audi VL381(0AW) Gearbox

This is a tutorial on how to use Yanhua Mini ACDP + Module 13 clone Volkswagen/ Audi VL381(0AW) gearbox. Module 13 also supports DQ200(0AM/0CW), DQ250(02E/0D9), DL382(0CK), DL501(0B5) models as well.

Read also:

Yanhua Mini ACDP + Module 13 Clone VW Audi DQ200/250 Gearbox

Check full operations on Youtube:

Operation Process

To check connection diagram, please click "Help".

Please make sure the model & SN is correct;

Tool Required:

VL381 gearbox

VL381 interface board

20PIN cable

OBP+ICP adapter

ACDP host

Install the interface board. Short circuit the CAN resistor on the OBP+ICP adapter to the "CAN-R-JOIN".

Step1. Read & Backup Data

Mini ACDP >> VW >> Gearbox Clone >> Audi >> VL381(0AW) >> Full Backup

1. Please connect ACDP with the gearbox.

2. This function needs to be connected to the Internet. Please make sure the network is good.

Confirm the gearbox model, press "Continue".

Read to read chip data, press "OK".

Please save the chip data, press "OK".

*(Please noted the file name contains gearbox model & operation time)

Step2. Write Data

Connect the new VL381(0AW) gearbox.

Full write >> OK >> Continue >> OK >> Load data file

Data wrote successfully!

Completed.

http://blog.obd2shop.co.uk/yanhua-mini-acdp-module-13-clone-vw-audi-vl3810aw-gearbox/