Yanhua ACDP Module 42 MB DSM (FBS4) Data Transfer Tutorial

This tutorial guides you through the step-by-step process of transferring Mercedes-Benz DSM (FBS4) data using Yanhua Mini ACDP 2 with Module 42.

Check Full Operation Video:

Open the Mini ACDP app, and confirm that the programmer is bound.

Benz >> ISM/DSM refresh >> DSM Help

Connect ACDP to the DSM model properly.

Here's taking the A0002703252 DSM as an example.

DSM(FBS4) >> Identify info

Please use the ACDP standard power adapter(voltage+ 12V, current >= 2.5A).

Please connect the ACDP with the DSM module!

Verify that the identified info of the original vehicle module is correct.

Take a screenshot and save it.

Identify info finish.

Transfer data >> Step1: Read original module data >> OK >> Continue >> Continue

Click OK, save original data.

*Please note to back up the file's path, data, time & part numbers. The file name should end with "Orig.bin".

Read chip data finished.

Disconnect from the original vehicle module, and connect another second-hand gear shift module with the same part number.

Step2: Clear donor module data >> OK >> Continue

Verify that the identified module info is correct.

Click OK, save chip data.

* The file name should end with "CLR.bin".

The programming system is about to begin, and forbidden to power off or unplug the device during operation! Click Continue.

Erase data finished.

Step3: Write data to donor module >> OK >> Continue

Confirm that the data of the second-hand module has been cleared, and click Continue.

Click OK, select original data(File name ends with "Orig.bin").

Check if the parsed data is correct.

Click OK, save chip data.

Click Continue. Transfer data finished.

Return to the previous step.

Identify info >> OK >> Continue

Verify that the info of the transferred second-hand module matches the info of the original vehicle module.

www.obd2shop.co.uk