Yanhua Mini ACDP + Module 13 Clone VW Audi VL381(0AW) Gearbox

This is a tutorial on how to use Yanhua Mini ACDP + Module 13 clone Volkswagen/ Audi VL381(0AW) gearbox. Module 13 also supports DQ200(0AM/0CW), DQ250(02E/0D9), DL382(0CK), DL501(0B5) models as well.

Read also:

Yanhua Mini ACDP + Module 13 Clone VW Audi DQ200/250 Gearbox

Check full operations on Youtube:

Operation Process

To check connection diagram, please click "Help".

Please make sure the model & SN is correct;

Tool Required:

VL381 gearbox

VL381 interface board

20PIN cable

OBP+ICP adapter

ACDP host

Install the interface board. Short circuit the CAN resistor on the OBP+ICP adapter to the "CAN-R-JOIN".

Step1. Read & Backup Data

Mini ACDP >> VW >> Gearbox Clone >> Audi >> VL381(0AW) >> Full Backup

1. Please connect ACDP with the gearbox.

2. This function needs to be connected to the Internet. Please make sure the network is good.

Confirm the gearbox model, press "Continue".

Read to read chip data, press "OK".

Please save the chip data, press "OK".

*(Please noted the file name contains gearbox model & operation time)

Step2. Write Data

Connect the new VL381(0AW) gearbox.

Full write >> OK >> Continue >> OK >> Load data file

Data wrote successfully!

Completed.

http://blog.obd2shop.co.uk/yanhua-mini-acdp-module-13-clone-vw-audi-vl3810aw-gearbox/

Yanhua Mini ACDP + Module 24 Add JLR 2018+ Smart Key

This is a tutorial on how to add Jaguar/ Land Rover 2018+ smart key with Yanhua Mini ACDP & Module 24. The procedure requires a working key, read the post below to learn how it works.

Step1. Replace RFA Module/ RFA Chip

You can replace a new RFA module according to vehicle RFA model. Also you can replace the RFA main chip.

Step2. Write Initial Data

* If your chips or modules already have original data, you can skip this step. Otherwise, the initial data needs to be written.

Note: Please confirm the current module is a new RFA module or the the RFA main chip has been replaced with a new chip!

Tools Required:

Module 24

RFA module

20PIN cable

OBP+ICP adapter

ACDP programmer

Connect ACDP host, OBP+ICP adapter, interface clip & RFA module.

Mini ACDP >> Jaguar/ LandRover >> Program smart key(2018-) >> RFA write initial data >> SPC560B60L3 >> Write initial data >> JPLA(select the option according to RFA module)

To check connection diagram, press "Help".

Please connect ACDP with RFA module, don't cut the power or pull out the device during the programming!

Pin detection passed. If fails, please adjust the clip position to re-test.

Prepare to download data from the server, please keep the network stable during the download!

Prepare to write data, please do not power off or unplug the device & adapter during data writing!

Writing CFLASH data, please wait...

Writing chip data finished.

Save data file success.

Step3. Identify RFA Information

Remove the clip and install the interface board.

Identify RFA Info >> Continue 

Check the system information, make sure the RFA module is unlocked.

Read system info finished.

Save info file success.

Step4. Program Key via OBD

Load the RFA module, connect ACDP programmer to the vehicle via OBD.

Prepare 2 smart keys that can be programmed(working key is acceptable).

Replace RFA(JPLA/K8D2) program key >> Add smart key(auto mode)

Connect ACDP to the vehicle OBDII port.

Confirm the system information,

Continue >> OK 

Prepare to program, please make sure the stable power supply and DO NOT pull out the device during the programming!

Confirm the current vehicle ignition is off, the program will automatically open the ignition!

Programming RFA module is complete, the smart key program process is about to begin. Press "Continue".

Confirm the current vehicle ignition is off, the program will automatically open the ignition!

Please prepare at least 2 new keys and put them in the car. Press the unlock key during  key learning process. Press "OK", follow the prompts to start program keys. Please complete all the key learning operation within 30s.

Please hold the smart key that need to program in your hand.

Press the unlock button hard for 4s, and the car horn will sound twice to indicate that the current key has been programmed successfully. 

The first smart key has been programmed.

Please prepare the second smart key to be programmed!

Just repeat same operations as before...

Key programming successful. 

To add more keys, press "Yes". Otherwise, press "No".

Please confirm the key information, press "OK".

Done.

http://blog.obd2shop.co.uk/yanhua-mini-acdp-module-24-add-jlr-2018-smart-key/

Yanhua ACDP Module 25: VW/Audi 0DE Gearbox Mileage Correction

Latest Yanhua Mini ACDP Module 25 was released, supported to adjust VW/ Audi DQ380(0DE), DQ381(0DE), DQ500(0DE) gearbox mileage. Much safer without soldering. Should work together with Mini ACDP Programming Master.

Supported Car Model: 

Audi: A3, Q2, Q3, etc.

Volkswagen: Magotan, Passat(B8), Lamando, Golf GTI, Tiguan L, Teramont, new Skoda, etc.

Functions:

1. Identify gearbox model by OBD quickly.

2. No need to remove TCM, plug and play to correct mileage with special interface board.

Path in Mini ACDP APP:

VW >> Gearbox mileage correction >> VW/Audi >> DQ380(0DE)/DQ381(0DE)/DQ500(0DE)

Here's allowed to do identify, mileage correction(auto mode/ single step mode), time correction(auto mode/ single step mode), read & write EEPROM.

How to connect ACDP Module 25? 

Tools required:

SH725xx-0DE interface board

DB15-LAN adapter

TCU cable

Mini ACDP Basic module

VW/ Audi gearbox

Step1. Connect SH725XX-0DE to gearbox correctly as image.

Step2. Short the CAN resistor on the DB15-LAN adapter to CAN-R.

Step3. Connect ACDP, DB15-LAN adapter, interface board & gearbox.

http://blog.obd2shop.co.uk/yanhua-acdp-module-25-vw-audi-0de-gearbox-mileage-correction/

Yanhua Mini ACDP Module 24: 2018+ JLR IMMO Key Adding

Latest Yanhua Mini ACDP Module 24 can support to program 2018+ JLR key duplication. Includes RFA module + CPU SPC560B Blank Chip, no soldering, no risk. Experienced technicians can just buy SPC560B Blank Chip to refresh RFA module by themselves.

After programming 2018+ JLR keys, the vehicle still has all features as original, such as  start on emergency, comfort access, etc.

Functions

1. Supports new JLR 2018+ OBD key duplication(JPLA-14C104-AF).

2. Supports new JLR 2018+ key adding by replacing RFA blank processor or RFA module.

Prompt in Mini ACDP APP

The device does not obtain authorization of A702 module. The module name is New JLR (2018+) IMMO module, please click "Module List" to "Refresh" or "Add".

Note

1. It's risky to replace RFA blank processor or RFA module, please be careful. We provide blank processor and blank RFA module supporting service.

2. Module 24 NOT supported 2018+ JLR all keys lost.

3. Module 24 only supported key programming on car by OBD.

4. New key should support to modify ID(eg. Lonsdor JLR Key).

How to use Mini ACDP Module 24?

1. When writing data to blank processor, no need welding. Mini ACDP app can automatically detect pin. Data refresh is safe and reliable.

2. Yanhua platform can automatically detect the communication condition of RFA modules, including blank RFA modules and RFA modules after processor replacement.

3. Programming & learning keys by OBD, simple and efficient.

More questions, welcome to contact us.

http://blog.obd2shop.co.uk/yanhua-mini-acdp-module-24-2018-jlr-immo-key-adding/

YANHUA Mini ACDP PC Software 1.0.50 Free Download & Installation

YANHUA Mini ACDP not only can work on Android/IOS phone, but also supports working on computers. This post is a guide to the free download & installation YANHUA Mini ACDP PC software.

Free Download Mini ACDP PC Software 1.0.50

http://www.acdpmaster.com/img/ACDP_exe/PC-ACDP-1.0.50-EN.zip

Download Running Environment in case error

http://acdpmaster.com/img/ACDP_exe/runtime.rar

Operating system: Win7, Win10(not support Windows XP)

Size: 150.32MB

Note: Do NOT save in Disk C.

(or follow the below steps to download)

Where to download Mini ACDP PC software?

1.Visit http://acdpmaster.com/

2.ACDP Series >> Download >> ACDP PC Software >> Download

How to install Mini ACDP PC software?

1.Extract downloaded package, send “PC-ACDP” to desktop and run it.

Note: If an error message is displayed or the application cannot be started. Please install “Running environment”.

“ To run this application, you first must install one of the following versions of the .NET framework:v4.0. Contact your application publisher for instructions about obtaining the appropriate version of the .NET framework.”

2.Download & extract “runtime” package, run “NDP452-X86-X64-ENU” >> Select license terms >> Install.

3.Run “vs2013_x86” >> Agree terms and conditions >> install.

4.Run “vs2010_x86” >> Accept license terms >> Install

5.Run “PC-ACDP” as administrator

Done.

Now you can start to use Mini ACDP software on PC normally.

http://blog.obd2shop.co.uk/yanhua-mini-acdp-pc-software-1-0-50-free-download-installation/

Don’t Know Which Yanhua Digimaster 3 Adapter to Use?

Question: One customer complained that he doesn’t know how to use Yanhua Digimaster 3 Mileage Correction Tool with various adapters:

”Digimaster 3 is faulty, it is not communicating with adapters at all!

BMW 1 series E87 35080 no adapter present

BMW 5 series E60 35080 no adapter present

BMW 6 series F12 35160 no adapter present

BMW CAS3

BMW CAS2 

Transit 2011 cluster eeprom

Jaguar XF 2012 cluster eeprom 

VW GOLF MK5 try to read eeprom no adapter present

Tried multiple time to read many different eeproms no adapter present. I do understand you like to think tool is fine, but I rub out of patience and I have tested for many times in very multiple cars.”

Obd2shop engineer replied

The question is because of wrong adapter was used with Digimaster III to read different car models. Here we provide the correct adapter & path in D3 to help succeed in cluster calibration.

BMW 35080 & 160DOWQ should work with Yanhua 35080 V6 adapter to read;

BMW CAS2 & CAS3 should work with Yanhua CAS BDM adapter to read;

Transit & Jaguar XF should work with OBP adapter to read;

VW Golf is supported to read by OBD directly.

How to find correct adapter & instructions in Digimaster3 ?

Here’s taking BMW 3 Series E90 as an example, all info can be found in same way of vehicle model options: 

Including wiring diagram, workable adapter & instructions.

Path: Meter system >> Europe >> BMW >> 3 Series(E90) >> Meter adjustment >> 35080/ 35080 V6/ D80D0WQ

More any questions about the Yanhua D3 odometer correction tool, please let us know.

http://blog.obd2shop.co.uk/dont-know-which-yanhua-digimaster-3-adapter-to-use/