BMW F chassis 8HP EGS ISN refresh by Yanhua ACDP and Module 11

This post will guide you on how to use Yanhua Mini ACDP and ACDP Module 11 to do BMW F chassis 8HP EGS ISN refresh.

Check all the accessories we need

ACDP host

OBP ICP adapter

8HP interface board

20 PIN cable

Installing the 8HP interface board

Connect the OBP ICP adapter

Short the CAN resistor on the OBP ICP adapter to the "CAN R JOIN" side.

Connect the ACDP host

Power up the ACDP host

Open ACDP software

Please confirm the ACDP host is properly connected

Click "BMW">>"EGS">>"8HP ISN Clear (support F chassis")>>"Clear ISN"

Make sure that the ACDP device is connected to the EGS module

Confirm that the EGS supports clearing ISN and ISN is not cleared.

Click"Continue"

Start programming the EGS module soon...

EGS module is being programmed

ISN data is being cleared...

ISN data cleared successfully

Then we click EGS status

Make sure that the ACDP device is connected to the EGS module

Confirm that the EGS ISN has been cleared.

Done!

For more details on the operation, please refer to the following video: