Yanhua Mini ACDP Module 34 VW MQB RH850 Installation Tutorial

This is a tutorial on how to install Yanhua Mini ACDP Module 34 for VW MQB RH850 IMMO programming. Need to work with Mini ACDP-2 or Mini ACDP-1. It included a 9-piece bench interface board and license.

Features

Support D70F3423, D70F3426 IMMO & KM;

Support RH850 R7F71401/1402/1407 5A IMMO & KM;

Support RH850 R7F71401/ 1402/ 1404/ 1406/ 1407 5C KM.

Thumb Screw-Fastened R7F701402 Interface Board

1. Follow the visual positioning mark on the Module 34 Interface Board to find the installation area on the instrument.

2. Find the correct positioning holes of D1 on the instrument.

3. Align the interface board with the screw fastener holes and D1 positioning points.

4. Press the interface board down and tighten the locking screw.

5. Confirm again that the interface board D1 positioning pins are completely aligned with the D1 positioning holes of the instrument.

Lock Fastening R7F701407 Interface Board

1. Push all PCB lock fastening on the interface board to the unlock position. Follow the visual positioning mark to find the installation area on the instrument.

2. Find the correct positioning holes of D1, D2, D3 on the instrument.

3. Check that the D1 and D2 positioning pins are completely aligned with the positioning holes of the instrument. Ensure that the PCB lock buckle is completely aligned.

4. Finger down the pressure interface board, and push the PCB buckle to the locked position to lock the interface board.

5. Confirm again that the interface board D1, D2, and D3 positioning pins are completely aligned with the positioning holes of the instrument.

Lock Fastening D70F3426 Interface Board

1. Push the lock fastening of the interface board to the unlock position. Find the interface board installation area on the instrument according to the visual positioning mark on the interface board.

2. Find the correct positioning holes of D1, D2, D3 on the instrument.

3. Check that the D1 and D2 positioning pins are completely aligned with the positioning holes of the instrument. Ensure that the PCB lock buckle is completely aligned.

4. Push the PCB lock buckle to the locked position to lock the interface board.

5. Confirm again that the interface board D1, D2, D3, and D4 positioning pins are completely aligned with the positioning holes of the instrument.

www.obd2shop.co.uk

Yanhua ACDP Volvo 2023-2024 CEM Interface Board Installation

Yanhua ACDP Volvo (2023-) CEM Interface Board can support 2023-2024 Volvo Lynk & Co and S60/S90/XC60. Need to work with Yanhua Mini ACDP-2 or Mini ACDP. Read the article carefully to learn how to install it.

How to install for 2023-2024 Volvo Lynk & Co 01/03/09?

This is specifically designed for the SPC5748C chip model CEM.

1. Push the lock fastening of the interface board to the unlock position. Find the interface board installation area on CEM according to the visual positioning mark.

2. Align the interface board with the CEM socket and the 2 positioning holes.

3. Press the interface board downward with your fingers, and push the PCB lock buckle to the locked position to lock the interface board.

Installation is done.

How to install for 2023-2024 Volvo S60/S90/XC60?

This is specifically designed for the SPC5748G chip model CEM.

1. Push the lock fastening of the interface board to the unlock position. Find the interface board installation area on CEM according to the visual positioning mark.

2. Align the interface board with the CEM socket and the 2 positioning holes.

3. Press the interface board downward with your fingers, and push the PCB lock buckle to the locked position to lock the interface board.

Installation is done.

Yanhua Volvo CEM Interface Board has the advantage of compact size, precise pin positioning, and easy installation. Its pin connection is firm and stable, not easy to loosen, which makes it safer to read and write.

www.obd2shop.co.uk

(Fixed) BAV KAY programmer for my ACDP not working

A customer bought our ACDP 2 IMMO Locksmith Package, and today reported that the BAV KAY programmer for his ACDP is not working.

Problem:

It says to connect the BAV key reader when I plug in the key reader, it doesn't connect to the key reader, none of the light comes on the key reader, and it doesn't read the keys, everything else works fine with the ACDP device just not the key reader.

When I was trying to add a key to fem no lights and it said add key failed No lights on BAV were coming on.

Solution:

Put the key in the BAV instead of the fem unit.

For more technical service support, please visit

www.obd2shop.co.uk