How to Duplicate 2018+ JLR Keys with YANHUA MINI ACDP Module 47?

The YANHUA MINI ACDP with the new Module 47 can duplicate 2018+ JLR keys without removing the RFA. The procedure uses an ID-changeable aftermarket/universal key and the BAV-KEY adapter.

Connect and Identify the Vehicle

1. Connect the MINI ACDP to the vehicle OBDII port and use the standard ACDP power adapter (12V, ≥2.5A). Turn on the ignition so the instrument cluster lights up.

2. Open the ACDP APP and confirm the programmer is bound. Go to JLR >> ICP+OBD Duplicate key without removing RFA(2018-) >> OBD Identify Car Info.

3. Verify the original vehicle information, save a screenshot, and click Continue. Confirm that UWB, PE, and PS are turned off and that the key supports copying.

Identify the Original and Universal Keys

1. Select BAV identify key info >> Help >> OK. Connect the BAV-KEY adapter to the MINI ACDP and place the sensing area of the original key correctly on the adapter.

2. Verify the original key ID and chip model. Confirm that it is an OEM key, save a screenshot, and continue until the key information is read.

3. Place the new key on the BAV-KEY adapter and select BAV identify key info. Click OK >> Continue, then confirm that the key is an ID-changeable universal key.

Read the Original Key Data

1. Disassemble the original key and select the correct option according to the chip marked on the key or identified by the system. For an NCF29A4V key, select ICP+OBD program key >> Step1. ICP read original key >> Help.

2. Connect the key to the interface board and MINI ACDP correctly. Click OK >> Continue and confirm the original key information.

3. Wait for the key data to be read, then click OK to save it. Confirm that the backup file is saved successfully.

Make the Dealer Key

1. Select Step2. Make dealer key >> OBD+BAV make universal key>>Help, read the precautions, and place the ID-changeable key on the BAV-KEY adapter.

2. Verify the original vehicle information, connect the MINI ACDP to the BAV-KEY adapter, and place the universal key correctly on it. Verify the key information, select the original key data, and confirm the identified IMMO information.

3. Select Lost Key Channel 1 for duplication. The grayed-out channel is reserved for the working key and cannot be selected. Click Continue and wait for Make dealer key to finish. Do not disconnect or unplug the equipment during programming.

UWB must be disabled for this cloning function. If UWB is enabled, the cloned key only supports remote control and emergency start; Comfort Access and Keyless Start are not supported.

Verification

Reassemble the original key, then check both the original and newly copied keys in the vehicle. Confirm that the vehicle starts and the basic key functions work normally.

Read also

Yanhua Module 47 Released: 2018+ JLR Duplicate Key Without Removing RFA

http://blog.obd2shop.co.uk/yanhua-module-47-released-2018-jlr-duplicate-key/

www.obd2shop.co.uk

Yanhua Module 47 Released: 2018+ JLR Duplicate Key Without Removing RFA

Yanhua has released the new Module 47 for Mini ACDP and ACDP2, designed to support 2018+ JLR duplicate key programming without removing the RFA.

Key Features:

1. Supports 2018+ JLR duplicate key programming via OBD + ICP

2. No need to remove the RFA on supported vehicles

3. Compatible with Yanhua Mini ACDP and ACDP2

4. Supports NCF29A4V and NCF29AFV CPU keys

Compatibility

For 2018–2024 JLR vehicles with NCF29A4V, ACDP/ACDP2 supports OEM keys, ID-changeable aftermarket keys, and universal keys.

For 2025+ JLR vehicles with NCF29AFV, OEM keys only are supported, and the NCF29AFV chip needs to be desoldered.

With Module 47, locksmiths can enjoy a more convenient and efficient solution for supported JLR key duplication without removing the RFA.

www.obd2shop.co.uk

Fix YANHUA ACDP Module 2 FEM "Operation Timeout, Retry" Error

Issue & Fix: A YANHUA ACDP Module 2 stopped USB polling during FEM preprocessing and, after waiting about 20 minutes, displayed the error "Operation timeout, retry". To resolve the issue, first identify the FEM by OBD and check whether the recognized version and code are normal, then continue with the corresponding action.

Technical Explanation

The next step depends on whether the version and code identified by OBD are recognized correctly.

Diagnostic / Action Steps

1. Identify the FEM through OBD. 

2. Check whether the recognized version and code are correct. 

3. If both are recognized correctly, proceed directly with key programming. 

4. If the recognized information is abnormal, restore the following options on Mini ACDP:

Recover EEPROM Data 

Recover Coding Data

Final Result

The "Operation timeout, retry" error is cleared, allowing the key programming procedure to continue normally.

www.obd2shop.co.uk

YANHUA ACDP Module 46: MB VGS4-0 NAG2 TCU Virginizing & Data Transfer

What's New: YANHUA ACDP has added Module 46, supporting Mercedes-Benz VGS4-0 NAG2(4-4) TCU virginizing and personalized data transfer for TCU replacement. The module combines coding, reading, virginizing/data transfer, programming, and coding writing in one workflow, eliminating the need for third-party programming or coding devices. After data transfer, the replacement TCU can be installed and used directly.

Supported Type

MB VGS4-0 NAG2(4-4)

Compatibility & Licensing

Compatible with ACDP and Mini ACDP2.

Users who already own ACDP Module 16 only need to purchase the Module 46 license.

Functions

Read the original coding

Read the original IMMO

Refresh donor data

Write an original IMMO to the donor

Write original coding to the donor

Program the TCU

Support TCU's virginizing and personalized data transfer

www.obd2shop.co.uk

How to Fix YANHUA ACDP "Clear ISN Data Error" on BMW 8HP E84?

Issue & Fix: When the YANHUA Mini ACDP 2 reports a "Clear ISN data error" while clearing the BMW 8HP E84 ISN via OBD, resolve the operation by activating Module 40 authorization and switching to the "8HP Reset EWS (E/F/G Chassis, bench)" function.

Technical Explanation

The OBD method is insufficient for this specific ISN clearing task, necessitating a direct bench connection to facilitate the reset.

Action Steps

1. Activate the Module 40 Authorization within the ACDP software.

2. Disconnect the OBD setup and prepare for a bench connection, connecting directly to the transmission unit.

3. Select the “8HP Reset EWS (E/F/G Chassis, bench)” option to execute the clear.

Final Result

The ISN data clears successfully with the bench-mode configuration.

www.obd2shop.co.uk

YANHUA Mini ACDP 2 Cloning BMW BDC2 to BDC3 Encrypted Keys Tutorial

This guide provides a streamlined walkthrough for copying a BMW BDC2 encrypted key to a BDC3 key using the Yanhua Mini ACDP2 with the BDC2 Solder-free Adapter.

Required Hardware:

Main Unit: YANHUA Mini ACDP/ ACDP-2.

Adapter: BDC2 Solder-free Adapter (from BMW Interface Board Kit).

Module: YANHUA ACDP Module 38.

Prerequisites: Software Requirements

Before starting, ensure your software meets the following minimum version requirements:

Step 1: Prepare and Connect the Original Key

1. Disassemble the original BMW BDC2 car key to access the internal chip.

2. Connect the key to the ACDP BDC 2/3 Interface Board.

3. Set the DIP switch on the adapter to the “BDC2” side.

Step 2: Read and Back up Original Key Data

1. Open theACDP app and ensure your device is bound.

2. Navigate to: BMW > FEM/BDC > IMMO/Mileage > BDC02/BDC03/BCP/LCD-Key (Encrypted Chip) ICP Copy Key> BDC02-KEY(Rectangle main chip) > Read Orig-key Data.

3. Verify and Backup: Confirm the original key information, take a screenshot, and save the data as a .bin file.

Step 3: Write Data to the New Key

1. Disassemble the new key (this method supports both brand new and secondhand BDC3 keys).

2. Swap Keys: Remove the original BDC2 key from the adapter and replace it with the new BDC3 key.

3. Toggle Switch: Move the DIP button on the adapter to the “BDC3” side.

CAUTION: Do not leave the original key connected during this step, as it may cause data loss or damage.

4. Select Write BDC3-Key (Square main chip) in the app.

5. Load Data: Select the original BDC2 backup file (.bin) based on the correct VIN and Key ID.

6. Follow the prompts to finish writing the data.

Step 4: Final Assembly and Testing

1. Reassemble both the original BDC2 key and the newly copied BDC3 key.

2. Test both keys inside the vehicle to ensure remote functions and ignition work correctly.

Video guides:

www.obd2shop.co.uk

BDC3 Key ICP Copy with Yanhua ACDP for BMW

This guide explains how to perform a BMW BDC3 key (Encrypted Chip) ICP copy using the ACDP programmer and BDC3 interface board.

Before starting, make sure your software is updated to the required versions.

Software Requirements

To use this feature, upgrade your ACDP software to:

ACDP PC Software: Version 1.0.64 or higher

ACDP2 PC Software: Version 2.0.8 or higher

Android APP: Version 3.0.141 or higher

iOS APP: Version 3.6.4 or higher

Step 1: Prepare the Original Key

Disassemble the BDC3 key as shown in the reference images.

Follow the instructions in the “Help” section.

Properly connect:

ACDP programmer

BDC2/BDC3 interface board

Original key

Switch the DIP button to the “BDC3” side.

Step 2: Read Original Key Data

Open the ACDP APP.

Confirm in the top right corner that the ACDP programmer is successfully bound.

Navigate to:

[BMW] → [FEM/BDC] → [IMMO/Mileage] → [BDC02/BDC03/BCP/LCD-KEY (Encrypted Chip) ICP CopyKey] → [BDC03-KEY (Square Main Chip)] → [Read Orig-key Data]

Use the ACDP standard power adapter (12V, ≥2.5A).

Click [OK] to continue.

Wait while the system reads the key data.

After reading:

Verify the original key information.

Take a screenshot for backup.

Record the file path, date, time, VIN, and key ID.

Ensure the backup file ends with “.bin”.

Confirm the reading process is complete.

Step 3: Write Data to the New BDC3 Key

Select the corresponding menu according to the new key type.

In this example, we replace the original key with a new BDC3 key.

Click:

[Write BDC03-KEY (Square Main Chip)]

Use the ACDP standard power adapter (12V, ≥2.5A).

Click [OK] to proceed.

Verify the new key information.

Record the backup file path, date, time, VIN, and key ID.

Ensure the file ends with “.bin”.

Next:

Click OK and select the original key data file.

Choose the correct file based on date, time, VIN, and key ID.

Confirm it matches the original key information.

Wait while the system writes the key data.

Once finished, the key writing process is complete.

Step 4: Final Verification

Reassemble both the original key and the new key.

Enter the vehicle.

Test both keys to ensure they function properly.

Video Guide

Watch the full operation video here:

For more professional automotive tools and guides, visit:

www.obd2shop.co.uk

New Arrival: Yanhua ACDP BMW BDC2–LCD Encrypted Key Copy Kit

The Yanhua Mini ACDP BMW Encrypted Chip Key Copy Interface Board Kit is a professional solution designed for copying and writing BMW encrypted key data safely and efficiently. With a no-soldering, no-risk design, this kit significantly simplifies BMW key programming operations while minimizing the possibility of damage.

Note: This kit must be used together with the ACDP Module 38 license, and is compatible with ACDP and ACDP2 devices.

Key Features:

No soldering required – plug-and-play operation

No risk of damage to the original key or board

Supports BMW BDC2, BDC3, BCP, and LCD encrypted chip keys

Works seamlessly with Yanhua Mini ACDP / ACDP2

Designed for professional locksmiths and automotive technicians

Supported Functions

The interface board kit supports flexible key data writing across multiple BMW key types:

1. The BCD2 working key data can be written to original BDC2, BDC3, BCP, and LCD keys.

2. The BCD3 working key data can be written to original BDC2, BDC3, BCP, and LCD keys.

3. The LCD working key data can be written to the original BDC2, BDC3, BCP, and LCD keys.

4. The BCP (without UWB) working key data can be written to the original BDC2, BDC3, BCP, and LCD keys.

5. The BCP (with UWB) working key data can only be written to the original BCP (with UWB) keys.

Supported BMW Encrypted Key Types

BMW BDC2 / BDC3 Encrypted Chip Keys

The kit supports secure data copying for BMW BDC2 and BDC3 encrypted chip keys using the interface board and ACDP device.

BMW BCP Encrypted Chip Keys

Both BCP keys without UWB and BCP keys with UWB are supported, with a clear distinction to ensure correct and safe data writing.

BMW LCD Encrypted Chip Keys

Compatible with multiple generations of BMW LCD keys, including:

LCD Key (before 2015)

LCD Key (2015–2017)

LCD Key (2018 and later)

Conclusion

The Yanhua Mini ACDP BMW BDC2/BDC3/BCP/LCD Encrypted Chip Key Copy Interface Board Kit is a reliable and efficient tool for modern BMW key programming. Its no-soldering design, wide compatibility, and precise key data handling make it an essential solution for professionals working with BMW encrypted keys.

For best results, ensure the ACDP Module 38 license is activated before use.

www.obd2shop.co.uk

Nissan 07A Gearbox Replacement Using Yanhua ACDP2 and Module 43

This guide explains how to replace a Nissan 07A (RE7R01A) gearbox using Yanhua Mini ACDP2 with Module 43.

The procedure is also compatible with ACDP (first generation).

Operation Steps

1. Preparation

① Open the ACDP APP

② Confirm in the top-right corner that the ACDP programmer is successfully bound

2. Connect to the Original Gearbox

① Tap [Module] → [Nissan TCM R/W Data]

② Select RE7R01A Help

③ Carefully read the help documentation

④ Connect the ACDP to the original vehicle’s gearbox according to the wiring diagram

3. Identify Gearbox Information

① Tap [RE7R01A] → [Identify]

② Use the ACDP standard power adapter

Voltage: 12V

Current: ≥ 2.5A

③ Click [Continue]

④ Verify the identified information

⑤ Take a screenshot and save it

Identification completed successfully

4. Read MAPS Data

① Tap [Read MAPS]

② Ensure the standard power adapter is connected (12V / ≥2.5A)

③ Click [Continue]

④ Do NOT power off or disconnect during the process

⑤ Wait for data reading to complete

⑥ Click OK and save the MAPS file

Important Notes:

Back up the file path, date, time, and version number

The file name must end with MAPS.bin

Reading completed successfully

5. Connect Replacement Gearbox

① Disconnect the ACDP from the original gearbox

② Connect it to another same-version Nissan 07A gearbox

6. Write MAPS Data to Replacement Gearbox

① Tap [Write MAPS]

② Select the original vehicle’s file ending with MAPS.bin

③ Verify file information (date, time, version)

④ Click OK to continue

System process:

Connecting system…

Erasing chip data…

Writing chip data…

⑤ Once completed, click OK

Writing completed successfully

Video Guide

YouTube Short:

More Tools & Information: www.obd2shop.co.uk