Yanhua Mini ACDP Module 33 PCF Adapter Upgrade Tutorial

This tutorial is on upgrading the Yanhua Mini ACDP Module 33 PCF adapter step by step. If you're unable to learn the key or got the key learning fault with Mini ACDP-2, this can help solve the problem.

Check the video to view the detailed operation:

How to Upgrade ACDP Module 33 PCF Adapter?

Power on & open Mini ACDP.

The device number is displayed in the top right corner, indicating that the device is connected.

Slide the page to the bottom.

Special function >> Adapter upgrade >> Help for PCF-KEY Upgrade

Connect the PCF-KEY adapter to the ACDP device.

Click "PCF-KEY Upgrade".

Please use the ACDP standard power adapter(voltage+ 12V, current >= 2.5A).

Please insert the PCF-KEY adapter.

Check the current version and the latest version number. 

If inconsistent, click "Yes" to upgrade to the latest version.

The upgrade adapter is complete.

www.obd2shop.co.uk

How to install ACDP Module 33 MQB lock fastening (MQB-82) interface board

This post will guide you on how to install the MQB lock fastening (MQB-82) interface board from Yanhua ACDP Module 33.

Here comes the procedure:

1. Push the lock fastening of the interface board to the unlock position.

Find the interface board installation area on the instrument according to the visual positioning mark on the interface board.

2. Find the correct positioning holes of D1, D2, D3 and D4 on the instrument.

3. Place the interface board accurately into the installation area and align the pins with the D1, D2, D3, and D4 positioning holes.

4. Finger-down pressure interface board.

Push the PCB lock buckle to the Locked position to lock the interface board.

The installation is done.

5. Confirm again that the interface board D1, D2, D3, and D4 positioning pins are completely aligned with the D1, D2, D3, and D4 positioning holes of the instrument.

Check the video to view the detailed operation:

www.obd2shop.co.uk

Yanhua Mini ACDP 2 + Module 33 Add VW MQB48 5A Smart Key

This is a tutorial on how to use Yanhua Mini ACDP 2 + Module 33 to add a smart key for Volkswagen MQB48 5A. Read the article carefully to learn.

Check the video for full operation:

Step1. Obtain IMMO Data

1. Remove the instrument cluster from the car, and open the cluster shell to check the chip model.

2. Power on Mini ACDP-2.

Mini ACDP >> VW >> VW MQB IMMO >> MQB48(VDO/JCI-NEC35xx Lock) >> ICP read dashboard >> D70F3529 >> Help

Follow the diagram to connect the device & instrument properly.

MQB82 interface board >> OK >> OK >> Continue >> Continue

The data was read successfully!

Please save all backup data of the chip.

Execution complete!

Reinstall the instrument panel into the vehicle and confirm that the vehicle is functioning properly.

IMMO >> OBD identify Help

Connect Mini ACDP 2 to the OBDII port properly.

OBD identify >> OK

Connect ACDP to vehicle OBDII!

If you have a working key, please insert it to/near the ignition switch and light the meter!

If all key lost, open the headlight and step on the brake!

Turn on the switch, and click "Continue".

Recognized vehicle info is correct.

OBD identify info to finish.

Obtain IMMO data >> Load meter data calc IMMO >> OK

Prepare the ICP reading of the meter chip data, if the meter has an external EEPROM 95320/95128 chip, also need to prepare the external EEPROM data!

Please select the NEC chip data for the instrument.

Does the meter need to load external EEPROM 95320/95128 data? 

No - EEPROM is not loaded.

The IMMO data will be calculated soon, please keep the network smooth during the data calculation!

Please save IMMO data.

Obtain IMMO data finish.

Step2. Make Dealer Key

Make dealer key >> Add key(Need work key) >> Duplicate the key Help

Connect ACDP to PCF-KEY adapter.

Duplicate the key >> OK

Place the work key correctly on the PCF-KEY adapter.

Continue >> Please select IMMO data

IMMO info is correct.

Please save sync data.

Connect the ACDP to the PCF-KEY adapter.

Place the blank key that has been changed to the original car's lost key ID on the PCF-KEY adapter correctly!

Note: The new key should be a blank key that ID can be changed and the blank key has been changed to the ID of the lost key.

Place the blank key that has been changed to the original car's lost key ID on the PCF-KEY adapter correctly.

The key info is correct.

Select your vehicle manufacturer: VW

Programming key data is about to begin, and forbidden to power off or unplug the device during operation!

Make dealer key finish.

Step3. Learn Key

OBD learn key >> OK >> Continue

The read system info is correct.

Please select IMMO data.

Enter the number of learning keys: 2

1. Have all the keys ready, the keys that are not learned will not be able to start the car.

2. Don't turn off the ignition during learning, if the other keys are too close to the induction coil may cause learning failure.

3. Put the first key close to or insert the induction coil, and click "Continue".

Put the keys close to or insert the induction coil, and click "Continue".

Number of keys learned: 2

Completed.

Please try on the car and verify if the added key functions are normal.

www.obd2shop.co.uk

Yanhua Mini ACDP-2 Add VW 4.5th MQB 3526+95320 Smart Key

This is a tutorial on how to use Yanhua Mini ACDP-2 + Module 33 to add a smart key for the Volkswagen 4.5th generation MQB(3526+95320).

Remove the instrument cluster from the car and open the cluster shell to check the chip model.

Power on Mini ACDP-2.

Open the Mini ACDP app.

Confirm the SN is showing in the upper right corner, which means the device is connected to your phone or PC.

VW >> VW MQB IMMO >> MQB 4.5TH(NEC+95320) >> ICP Read Dashboard >> D70F3526(A2C81589700)(A2C99606600) >> MQB74 interface board D70F3523/ 24/ 25/ 26+95320

*Click "Help" to check the connection diagram.

Please use the ACDP standard power adapter(voltage+12V, current >= 2.5A).

Please connect the main unit and the meter.

Continue >> Continue

Data read successfully.

Please save all backup data of the chip.

OK >> OK

Please save the EEPROM data.

Reinstall the instrument panel into the vehicle and confirm that the vehicle is functioning properly.

IMMO >> Step1: OBD identify Help

Connect the ACDP to the vehicle's OBDII port properly.

Step1: OBD identify >> OK

Connect ACDP to vehicle OBDII!

If have a working key, please insert it to/near the ignition switch and light the meter!

If all key lost, open the headlight and step on the brake!

Continue >> OK

OBD identifies info to finish.

Obtain IMMO data >> Load meter data calc IMMO >> OK

Prepare the ICP reading of the meter chip data, if the meter has an external EEPROM 95320/95128 chip, also need to prepare the external EEPROM data!

Please select the NEC chip data for the instrument.

Does the meter need to load external EEPROM 95320/95128 data? 

Yes - EEPROM loaded.

Please select external EEPROM 95320/95128 data.

The IMMO data will be calculated soon, please keep the network smooth during the data calculation!

Please save IMMO data.

OK >> OK >> OK

Obtain IMMO data finish.

Make dealer key >> Duplicate the key >> OK

Connect the ACDP to the PCF-KEY adapter.

Place the blank key that has been changed to the original car's lost key ID on the PCF-KEY adapter correctly!

Note: the new key should be a blank key that ID can be changed and the blank key has been changed to the ID of the lost key.

Place the blank key that has been changed to the original car's lost key ID on the PCF-KEY adapter correctly.

Continue >> Continue

Please select IMMO data >> Continue >> VW

Programming key data is about to begin, and forbidden to power off or unplug the device during operation!

Make dealer key finish.

OBD learn key >> OK >> Continue >> Continue

Please select IMMO data.

Enter the number of learning keys: 2

Tips

1. Have all the keys ready, the keys that are not learned will not be able to start the car.

2. Don't turn off the ignition during learning, if the other keys are too close to the induction coil can may cause learning failure.

3. Put the first key close to or insert the induction coil and click "Continue".

Put the 1st key close to or insert the induction coil, and click "Continue".

Put the 2nd key close to or insert the induction coil, click "Continue".

Number of keys learned: 2

Completed learning 2 keys.

The smart key addition is complete.

Please try on the car and verify if the added key functions are normal.

Video guides:

www.obd2shop.co.uk

How to install ACDP Module 33 MQB-87 interface board

This post will guide you on how to install the MQB lock fastening (MQB-87) interface board from Yanhua ACDP Module 33.

Here comes the procedure:

1. Push the lock fastening of the interface board to the unlock position.

Find the interface board installation area on the instrument according to the visual positioning mark on the interface board.

2. Place the interface board against the instrument socket and align the pins with the D1 and D4 positioning holes.

3. Check that the D1 and D4 positioning pins are completely aligned with the D1 and D4 positioning holes of the instrument and ensure that the PCB lock buckle is completely aligned.

4. Place your finger on the fingerprint position of the interface board press down on the interface board, and push the PCB lock buckle to the locked position to lock the interface board.

The installation is done.

5. Confirm again that the interface board D1, D2, D3, and D4 positioning pins are completely alignined with the D1, D2, D3, and D4 positioning holes of the instrument.

Video Guide:

www.obd2shop.co.uk

How to install ACDP Module 33 MQB lock fastening (MQB-77) interface board

This post will guide you on how to install the MQB lock fastening (MQB-77) interface board from Yanhua ACDP Module 33.

Here comes the procedure:

1. Push the lock fastening of the interface board to the unlock position.

Find the interface board installation area on the instrument according to the visual positioning mark on the interface board.

2. Place the interface board against the instrument buzzer and align the pins with the D1 and D4 positioning holes.

3. Check that the D1 and D4 positioning pins are completely aligned with the D1 and D4 positioning holes of the instrument and ensure that the PCB lock buckle is completely aligned.

4. Place your finger on the fingerprint position of the interface board

Press down on the interface board.

Push the PCB lock buckle to the Locked position to lock the interface board.

The installation is done.

5. Confirm again that the interface board D1, D2, D3, and D4 positioning pins are completely aligned with the D1, D2, D3, and D4 positioning holes of the instrument.

Video guides:

www.obd2shop.co.uk