How to use Yanhua RF adapter to detect remote key frequency?

Yanhua RF-Test Frequency Detector is able to test remote key frequency incl. 315Mhz, 434Mhz, 868Mhz. Yanhua RF adapter can work alone and with ACDP.

1. Work alone to test frequency: 



Detect 434Mhz

Detect 315Mhz

Detect 868Mhz

2. Work with Yanhua Mini ACDP to test frequency: 



Plug RF-Test to ACDP, and communicate with a phone.

Select "Special function".
Select "Key Remote Frequency".

Select "Frequency Detect".

All succeed.

Prompt:
Connect the RF adapter to ACDP and click the [OK] button. Observing that the power
LED light on. Press the remote control key.

The first one remote key frequency 434.71MHz.

Put on another one remote key, test frequency 315.55MHz.

And one more remote key frequency 869.82 MHz.

http://blog.obd2shop.co.uk/how-to-use-yanhua-rf-adapter-frequency-tester-with-acdp-and-alone/

How to use Yanhua Mini ACDP program BMW CAS3 perfectly?

You need:
Yanhua Mini ACDP Master ACDP with BMW CAS1-CAS4+ module

Here you go Yanhua ACDP BMW key programmer

And CAS3

It is not difficult to do it.
There is a little device that comes with it...

Look at this device, you can see the end of it.

put the CAS3 adapter on the CAS3 module, just tighten it.

What we do next is just turn on the host and server online.
Tap "BMW" -> CAS3 / CAS3 + - ...15Y.... ->

IMMO.

Read the CAS data.

The device is being connected.

You can clearly see it's nothing there, so well I can continue....

Detecting pin, please wait...

Detection results...Good
Just reset the board on top, just nip each side up and then five turns each side unit they say it's finger tight and as you can see it works first time. Another thing is don't forget to clean the pads you will notice in the pore grew up...So I hope that that is a bit helpful, so let's continue.

Configuring adapter parameter, please wait...

Decoding the memory, please wait...
Read the CAS3 I did mention.
You can see it's running okay.

Readout vehicle information.

They want you back up.

Very good, the job is done.
So Next is to generate dealer keys.

So I just want to share the simplicity of putting that on. So that's the only thing I can say that's my tip. It seems everything works for every time, just make sure you clean the parts, don't go mad with them the right of this driving you might as well get the soldering iron out.
Yes, if you do fasten the buttons, it tightens up you leave everything going to place.
So anyway I hope it helped and leave your comments.

http://blog.obd2shop.co.uk/how-to-use-yanhua-mini-acdp-program-bmw-cas3-perfectly/

New! Yanhua Mini ACDP Module 10 Porsche BCM Module

Yanhua Mini ACDP newly adds Porsche module and authorization, it supports adding key and all-key-lost for Porsche BCM. Free of disassembly, solderless and with the key refresh function, No longer afraid of loss caused by key be locked.


ACDP makes Porsche BCM advantages:

1. Free of disassembly, Solderless.
No need to remove components,
No need to cut the line, no risk of damage to the BCM computer board.
2. Set anti-theft data reading and writing, Anti-theft data calculation, key programming in one.
3. The interface board replaces the welding wire, the pin connect with intelligent detection, and the data reading and writing is safe and reliable.
4. With the key refresh function, No longer afraid of loss caused by key be locked.

Porsche BCM Module configuration:

How to use ACDP Porsche key programmer?

Video guide:

https://yanhua-mini-acdp.blogspot.com/