This post will show you how to install the Yanhua Mini ACDP Module 34 Lock fastening (D70F3426-B) interface board.
Check the video on YouTube:
Here are steps:
1. Push the lock fastening of the interface board to the unlock position.
Find the interface board installation area on the instrument according to the visual positioning mark on the interface board.
2. Find the correct positioning holes of D1-D4 on the instrument.
3. Precisely align the lock buckle of the interface board PCB with the installation area and with the positioning points D1 and D2.
4. With the finger-down pressure interface board, push the PCB lock buckle to the locked position to lock the interface board, and the installation is done.
5. Confirm again that the interface board D1-D4 positioning pins are completely aligned with the D1-D4 positioning holes of the instrument.
No comments:
Post a Comment