Yanhua Mini ACDP Module 28: Clone ZF-9HP Gearbox

Latest Yanhua Mini ACDP Module 28 can clone ZF-9HP gearbox in BOOT mode. Supports Jaguar, Land Rover, Chrysler, Dodge, Fiat, Honda, Jeep, etc. Need to work with Mini ACDP basic module.

Features

1. The Interface board can be inserted blindly to align with the boot test point, no need magnifying glass for calibration or complex probe workbench operation.

2. It's more safer and reliable to use BOOT test point with pin detection function, data read & write.

3. It's more simple & efficient to use special interface board rather than cables.

Why buy Mini ACDP Module 28?

Traditional BOOT mode: 

- Boot point needs to be aligned by human eye with magnifying glass;

- Cable connection is risky to damage module due to misoperation.

ACDP BOOT mode:

- Interface board blind insertion

- Boot test point with pin detection function.

www.obd2shop.co.uk

Yanhua Mini ACDP Module 27: Read/Write BMW DEM ISN & Clone

Yanhua Mini ACDP Module 27 is supported to read/write ISN & clone BMW E/F chassis MSV80, MSD80, MSD81, MSD85, MSD87, MSV90 DME. Must work with Mini ACDP basic module on a smart phone. Compatible with Android & iOS system.

Features

1.Fast reading/writing ISN & clone DME on bench without having to open the shell or program DME.

2.Special interface board is more convenient than wire connection, easier and safer, more efficient and reliable.

Support DME type: Continental, SIEMENS

Mini ACDP APP Operation Steps

Step1. Connect

Step2. Read/write data

Step3. Disconnect

Yanhua ACDP BMW allows to backup & write data, read & write MAPS, INT/EXT EEPROM, modify ISN data.

How to connect Module 27?

1. Prepare ACDP, OBP+ICP adapter, interface board & BMW DME.

2. Connect the interface board correctly to the DME interface as shown.

3. Short the CAN resistor on the OBP + ICP adapter to the "CAN-R Join".

4. Connect all together.

BMW MSV80

BMW MSD80/MSD81

BMW MSD85/MSD87

BMW MSV90

http://blog.obd2shop.co.uk/yanhua-mini-acdp-module-27-read-write-bmw-dem-isn-clone/

How to perform authorization of the Yanhua Mini ACDP module

This article will guide you on how to authorize the Yanhua Mini ACDP module automatically.

Here are the steps:

The new module has an authorization code sticker on the outside.

Please peel off the green protective film.

If the authorization code is covered with residual gel, remove it with an eraser.

Make sure the QR code is clearly visible.

Open the ACDP APP and check that the ACDP device is connected correctly.

Click "Me" in the lower right corner and choose "Module List".

Click "Add" in the lower left corner, then click "Scan QR Code" to continue.

The authorization card number will be filled in automatically.

You can also manually enter the authorization card number.

Please note that letters must be capitalized.

Check the authorization card number, make sure it is correct and click "Submit".

The authorization is successful!

Video guide:

Ford DPS6/MPS6 Gearbox Clone with Yanhua Mini ACDP

This is a tutorial on how to clone Ford DPS6 & MPS6 gearbox module with Yanhua Mini ACDP step by step. The MPS6 gearbox clone procedure also applies to Volvo, Land Rover, Chrysler, Dodge, etc.

How to Clone Ford DPS6 Gearbox?

Tip: Click "Help" to view the connection diagram before operation.

Accessories Required:

Ford DPS6 gearbox module

20PIN cable

OBP+ICP adapter

ACDP host

Module 26 Ford DPS6 interface board

Connection

1. Install the interface board.

2. Short the jumper cap on the OBP+ICP adapter to the "CAN-R" JOIN side.

3. Connect to ACDP together

Operation

Step1. Backup Original Data

Mini ACDP >> Ford >> Gearbox clone >> DPS6 >> Connect >> OK

Please ensure a stable network connection.

DO NOT pull out the device during working.

Click "Continue".

Check system info,

Continue >> OK >> OK >> OK

Read/write data >> Full backup data >> OK >> Continue

Save chip data.

Reading chip data finished.

Return back to the previous page.

Disconnect >> OK >> Continue

Disconnect finished.

Step2. Write to New Gearbox

Connect the new DPS6 gearbox module & prepare to write the original data.

Connect >> OK >> Continue >> Continue >> OK

Connect system finished.

Read/write data >> Full write data >> OK >> Continue >> Load original data file

Ready to write chip data, please don't cut the power nor pull out the device during the programming!

Click "Continue".

Writing chip data finished.

Return back to the previous page.

Disconnect >> OK >> Continue

Disconnect finished.

Completed!

How to Clone MPS6 Gearbox?

Tip: Click "Help" to view the connection diagram before operation.

Accessories Required:

MPS6 module

OBP+ICP adapter

ACDP host

20PIN cable

Module 14 MPS6 interface board 

Connection

1. Install the MPS6 interface board.

2. Short circuit the CAN resistor on the OBD+ICP adapter to the "CAN-R" JOIN side.

3. Connect ACDP, OBP+ICP adapter & MPS6 gearbox.

Operation

Step1. Backup Data

Mini ACDP >> Jaguar/Land Rover >> Gearbox clone >> Freelander >> MPS6 >> Full backup data >> Continue

Remember to save module info, click "Continue".

Save chip data file.

Backup chip data finished.

Step2. Write Data

Connect the new MPS6 gearbox & prepare to write the original data.

Full write data >> Continue >> Continue >> Load chip data file

Ready to write chip data, please don't cut the power nor pull out the device during the programming!

Writing chip data finished.

Completed.

http://blog.obd2shop.co.uk/ford-dps6-mps6-gearbox-clone-with-yanhua-mini-acdp/

Benz VGS-NAG3 9GTronic Gearbox Clone via Yanhua Mini ACDP

How to clone Mercedes Benz VGS-NAG3 9GTronic gearbox with Yanhua Mini ACDP + Module 16? Follow this guide to learn how to do it.

Note: click "Help" to check the connection diagram.

Tools Required

VGS-NAG3(9 Tronic) gearbox

PTCU cable

DB15-LAN adapter

SH725XX interface board

ACDP host

Installation

1. Install the interface board.

2. Short circuit the CAN resistor on the DB15-LAN adapter to the "CAN-R" side.

Operation

Mini ACDP >> Benz >> Gearbox clone/refresh >> C class >> VGS-NAG3(9GTronic) >> Full backup data

Connect ACDP with the gearbox.

Remember the BOOT version & Bosch number. These 2 numbers of new gearbox should be same as original one.

Save chip data file.

Connect the new VGS-NAG3(9Tronic) gearbox.

Full write data >> Continue >> Check BOOT version & Bosch number, continue.

Select chip data file to write.

Write data finished.

Completed!

Read also:

Mercedes Benz VGS2-NAG2 Gearbox Refresh with Yanhua Mini ACDP

GM 6L50 Gearbox Clone via Yanhua Mini ACDP and Module 22

Yanhua Mini ACDP with Module 22 can support GM 6TXX / 6LXX gearbox clone, this article will take GM 6L50 as an example to guide you on how to do it.

The accessories we need:

20 PIN Cable

OBP+ICP Adapter

ACDP Host

6LXX Interface Board

Connect the ACDP, OBP + ICP adapter, interface board and gearbox as the picture shows.

Open the Mini ACDP APP, choose "GM" → "Gearbox clone" → "GM 6L50"

Backup chip data

Choose "Full backup data", and make sure the gearbox is connected with ACDP.

Confirm the system information and save the screenshot, click continue.

After the clip data has been read successfully, click "Save" in the lower right corner.

Write chip data

Choose "Full Write data", and make sure the gearbox is connected with ACDP.

Confirm the system information and save the screenshot, click continue.

Select the original data file that saved in the previous step.

The device is about to write clip data, please make sure these two gearbox computers' model are the same.

Writing chip data finished.

For more detailed steps, please refer to the video:

Yanhua FEM/BDC Special Programming Clip for 95128/95256 Chip

Yanhua FEM/BDC Special Programming Clip is designed to pre-process BMW FEM/BDC module without having to remove or solder 95128/95256 chip. With it, you don't need to worry about how thick the paint on the chip!

Highlights

 Fast clamping

 Safe & reliable

 Simple positioning, not easy to slip.

 Easy to solve the problem of chip paint thick & puncture socket slip off.

 Compatible with Yanhua Mini ACDP, CGDI, VVDI, Autel, Launch X431. 

How to install FEM/BDC Special Programming Clip?

1. Insert the 2 screws of the special programming clip into PCB plate holes.

2. Lock the PCB lock.

FEM connection diagram

BDC connection diagram

http://blog.obd2shop.co.uk/yanhua-fem-bdc-special-programming-clip-for-95128-95256-chip/